krchowdary
01-18 03:17 PM
we are all once H1b holders
wallpaper Arm Maori tattoo
garamchai2go
12-19 08:13 AM
Hi All,
Me and my wife are traveling to India. We are going for visa re-stamping (consular processing).
Based on the information provided below, can you provide lists of forms/docs that we're supposed to carry with us when we visit the consulate for stamping?
THANKS IN ADVANCE!
- Amit
My visa:
- I entered on H1B. Then I had to change employer so visa was transfered (And they extended it for another 2.5years). So now I have a H1B visa which is valid till June 2009, and passport with expired H1B stamp.
- With the new employer - I've an approved PERM. I140 is pending. I485 is filed. EAD received. Do I need to take approval notices and/or receipt notices of any/all of these stages?
My Wife's visa:
- she entered on H4. Now she has a H1B visa which is valid up 2010, and passport with expired H4 stamp.
Is she required to take approval notices and/or receipt notices of i485.. or my PERM or i140?
Rather than taking inputs from forum members on the documents required, I recommend go to Consulate website or vfs website to find the list of documents. Ex: http://chennai.usconsulate.gov/work_visas_h_l.html
Yes, carry all your AOS related documents. Please note that, you cannot expect passport immediately after stamping. This is due to extra PIMS clearance introduced recently. In my case, my passport with visa stamp reached me only after 10 business days. So please have that extra buffer in your travel schedule.
After going through the nervousness of waiting for passport I felt it would have been better if I did not go to stamping in first place. Just travelled on AP would have been wise decision.
Me and my wife are traveling to India. We are going for visa re-stamping (consular processing).
Based on the information provided below, can you provide lists of forms/docs that we're supposed to carry with us when we visit the consulate for stamping?
THANKS IN ADVANCE!
- Amit
My visa:
- I entered on H1B. Then I had to change employer so visa was transfered (And they extended it for another 2.5years). So now I have a H1B visa which is valid till June 2009, and passport with expired H1B stamp.
- With the new employer - I've an approved PERM. I140 is pending. I485 is filed. EAD received. Do I need to take approval notices and/or receipt notices of any/all of these stages?
My Wife's visa:
- she entered on H4. Now she has a H1B visa which is valid up 2010, and passport with expired H4 stamp.
Is she required to take approval notices and/or receipt notices of i485.. or my PERM or i140?
Rather than taking inputs from forum members on the documents required, I recommend go to Consulate website or vfs website to find the list of documents. Ex: http://chennai.usconsulate.gov/work_visas_h_l.html
Yes, carry all your AOS related documents. Please note that, you cannot expect passport immediately after stamping. This is due to extra PIMS clearance introduced recently. In my case, my passport with visa stamp reached me only after 10 business days. So please have that extra buffer in your travel schedule.
After going through the nervousness of waiting for passport I felt it would have been better if I did not go to stamping in first place. Just travelled on AP would have been wise decision.
kirupa
02-13 04:10 AM
Real soon : http://www.kirupa.com/forum/showthread.php?t=319830 :)
2011 Agamid#39;s Lizard Arm Tattoo
morpis
06-25 12:34 PM
Hello all,
I am not able to get my passport renewed. Indian consulate in Houston said that it will take atleast 4 weeks to get a passport.
Pl help. Can I go ahead and apply for my 485?
Also, would you know anything about copies of affidavits?
Pl reply. I am in serious bind.
Thanks.
I am not able to get my passport renewed. Indian consulate in Houston said that it will take atleast 4 weeks to get a passport.
Pl help. Can I go ahead and apply for my 485?
Also, would you know anything about copies of affidavits?
Pl reply. I am in serious bind.
Thanks.
more...
mallickarjunreddy
05-19 07:29 AM
I fear a backlash as by now ewr would have made my company to be marked for secondary scrutiny. this is how the story unfolded
CBP --who is your manager
XYZ -- Mr ABC who is based in atlanta ..
CBP. hmmm.. can i have his phone #
CBP calls Mr ABC .. we r deporting XYZ hs papaers r not in order ..
no call back # nothing ..
meanwhile XYZ is asked to sign papers ..
I know we can refuse but those people r so intimidating and I guess if you dont sign ICE agents come in and tell you that it could take months to send you back
so poor xyz has no option but to sign and get a stamp on his passport that he is being deported
Councilor access is a myth and so is trying to call and talk to the CBP officers
and this is not a small body shop .. it has atleast 500 people working on various projects across US and those people were not on bench
i can field any questions ...
CBP --who is your manager
XYZ -- Mr ABC who is based in atlanta ..
CBP. hmmm.. can i have his phone #
CBP calls Mr ABC .. we r deporting XYZ hs papaers r not in order ..
no call back # nothing ..
meanwhile XYZ is asked to sign papers ..
I know we can refuse but those people r so intimidating and I guess if you dont sign ICE agents come in and tell you that it could take months to send you back
so poor xyz has no option but to sign and get a stamp on his passport that he is being deported
Councilor access is a myth and so is trying to call and talk to the CBP officers
and this is not a small body shop .. it has atleast 500 people working on various projects across US and those people were not on bench
i can field any questions ...
kennyc
May 24th, 2005, 07:50 PM
Canon 20D EFS 17-85 IS lens:
KAC
KAC
more...
srini1976
04-15 12:36 PM
Congrats :)
2010 Tattoo Arm Design greek tattoo
Brasco
January 28th, 2008, 04:29 PM
It's actually a myth that a longer lens requires a higher aperture. For the same framing, you get the same DOF (Depth Of Field) for the same aperture, whether you use a 600mm telephoto lens or a 4.5mm ultra-fisheye. - Mats
You are technically correct of course, but for practical purposes, if Shannon's primary goal is trying to capture a good depth of field of a child running around, and based on Shannon's comment about the willingness to crop, DOF will be easier to achieve with a wider lens.
Having said that, it was good for you to provide the rest of the story as it may be the basis of decisioning as the skills improve.
You are technically correct of course, but for practical purposes, if Shannon's primary goal is trying to capture a good depth of field of a child running around, and based on Shannon's comment about the willingness to crop, DOF will be easier to achieve with a wider lens.
Having said that, it was good for you to provide the rest of the story as it may be the basis of decisioning as the skills improve.
more...
sweet_jungle
09-16 01:59 AM
I am a July 2 filer. I got 485 receipt notice from California Service Center with receipt date of july 2. Today, in mail, I got another notice called transfer notice, which states that my case has been transferred to Nebraska. The receipt date on the transfer notice is Sep 5. Is it nromal to have such diferent receipt dates? Will USCIS process by receipt date on receipt notice or on transfer notice?
hair skull on fire tattoos, arm
greencardvow
07-17 05:36 PM
I filed 485 on July 2 2007 through Company 1. I left the Company 1 on July 7 2007. Company 2 had filed for PERM in June that had an approval on July 16 2007. I wana apply for 140/485 through Company 2 (concurrent filing) by this July 2007. Can I have 2 pending 485 application? I dont have the receipt for 1st 485 as it was just filed on July 2.
more...
fittan
04-23 03:26 PM
gc28262,
I respectfully disagree. As you all know, the USCIS (online and phone) system is completely different from Infopass. What appears on the former is usually inaccurate. I know this because both my wife and I have received our GC but our online I-140 is still pending.
I am adament about this because I moved in Jan 08 and submitted AR-11. In July 08, my wife online status shows that a RFE was sent. We waited anxiously for 2 months for this letter. Then we went to Infopass and found out that they still have the old address. By the way, my address was updated. Few days after Infopass, the letter finally came. It was enclosed in another envelope (because the orginal bounced and USCIS resent to new address).
I think everyone should use Infopass frequently. Use it to check if your name check and biometric are cleared. Asked if there's any flag. Where your case is physically and of course your current address. I go to the Boston office all the time and it is usually empty in the morning. Whether the Infopass office is packed or empty has nothing to do with when you'll get your GC; there's 6 counters and I doubt they'll increase it if there're more people.
Fittan
I respectfully disagree. As you all know, the USCIS (online and phone) system is completely different from Infopass. What appears on the former is usually inaccurate. I know this because both my wife and I have received our GC but our online I-140 is still pending.
I am adament about this because I moved in Jan 08 and submitted AR-11. In July 08, my wife online status shows that a RFE was sent. We waited anxiously for 2 months for this letter. Then we went to Infopass and found out that they still have the old address. By the way, my address was updated. Few days after Infopass, the letter finally came. It was enclosed in another envelope (because the orginal bounced and USCIS resent to new address).
I think everyone should use Infopass frequently. Use it to check if your name check and biometric are cleared. Asked if there's any flag. Where your case is physically and of course your current address. I go to the Boston office all the time and it is usually empty in the morning. Whether the Infopass office is packed or empty has nothing to do with when you'll get your GC; there's 6 counters and I doubt they'll increase it if there're more people.
Fittan
hot arm sleeve tattoo for men
nsync1979
06-18 03:08 PM
thanks chanduv23 !!
more...
house Dragon Tattoo On Arm
vxb2004
05-31 05:53 PM
Hi,
I was wondering if anyone was ever able to change from Software Engineer to Technical Marketing Engineer (TME), using the AC21 portability rules. A TME needs similar level of technical skills as that of a Software Engineer, of course used for a different purpose.
A short description of this role (for those of you who don't know about this role)
The Technical Marketing Engineer role is exciting and challenging for the employee that enjoys equally working hands on with technology in the lab and marketing this knowledge to customers. Working with marketing, engineering, services and the sales channels
I really like to consider moving to TME roles. I see this as a first point to moving to Product Manager roles. One could move to Product Manager directly, but I guess the transition for a Software Engineer will be smooth, when he/she goes from Software Engineer -> TME -> Product Manager. The advantage with TME is, you can leverage your technical skills to perform this new role and then gradually hone your marketing/soft skills, to move to the Product Manager position. This is also the input I got from the Marketing Director of one of the reputed firms.
All looks good, but I am not sure if this transition to TME will be acceptable under the AC21 rules. It would be nice to know if anyone has ever able to do it successfully (without getting any RFEs/rejections). Right now, I have a feeling that I am totally stuck in the Software Engineer role and really like to explore my options.
Appreciate your thoughts on this
tpcool,
Given the fact that ur I-140 is not approved yet, I would wait till the approval before considering any job change.
Good luck.
I was wondering if anyone was ever able to change from Software Engineer to Technical Marketing Engineer (TME), using the AC21 portability rules. A TME needs similar level of technical skills as that of a Software Engineer, of course used for a different purpose.
A short description of this role (for those of you who don't know about this role)
The Technical Marketing Engineer role is exciting and challenging for the employee that enjoys equally working hands on with technology in the lab and marketing this knowledge to customers. Working with marketing, engineering, services and the sales channels
I really like to consider moving to TME roles. I see this as a first point to moving to Product Manager roles. One could move to Product Manager directly, but I guess the transition for a Software Engineer will be smooth, when he/she goes from Software Engineer -> TME -> Product Manager. The advantage with TME is, you can leverage your technical skills to perform this new role and then gradually hone your marketing/soft skills, to move to the Product Manager position. This is also the input I got from the Marketing Director of one of the reputed firms.
All looks good, but I am not sure if this transition to TME will be acceptable under the AC21 rules. It would be nice to know if anyone has ever able to do it successfully (without getting any RFEs/rejections). Right now, I have a feeling that I am totally stuck in the Software Engineer role and really like to explore my options.
Appreciate your thoughts on this
tpcool,
Given the fact that ur I-140 is not approved yet, I would wait till the approval before considering any job change.
Good luck.
tattoo arm tattoos pics
MatsP
June 2nd, 2006, 10:23 AM
Thanks, your reply really helped me understand a few things. First of all, for the money I can spend there isn't much of a choice (meaning what I already picked is fine for the money spent), then, even more important fact I realized is that the equipment I can afford for now, can be a starting point in my photography experience. It is more important that I use it, take photos and practice than to own expensive gear and never really use it. In the end I hope that one day in the future when I gain the needed skill I'll be able to afford a better and a more advanced equipment. So, once again, thanks a lot.
Yes, and of course, by using one type of equipment you also learn what you ACTUALLY need later on.
By the way, if money is tight, buying used equipment CAN be a way to save money - but of course, you get less warranty and if it breaks after 3-6 months, it's probably going to cost you the same again - which is fine if it was a real bargain, but if you paid only a little less than new-price, it's not... Lenses don't often break, but you never know if you get a Lemon...
--
Mats
Yes, and of course, by using one type of equipment you also learn what you ACTUALLY need later on.
By the way, if money is tight, buying used equipment CAN be a way to save money - but of course, you get less warranty and if it breaks after 3-6 months, it's probably going to cost you the same again - which is fine if it was a real bargain, but if you paid only a little less than new-price, it's not... Lenses don't often break, but you never know if you get a Lemon...
--
Mats
more...
pictures upper arm tattoo is very
thomachan72
06-21 05:51 PM
I would suggest that before you take more interest in her case, first consult with her husband and make sure it is OK with him ;) ;) You know what I mean, right?:D
dresses New tattoo arm dragon
prasadn
10-07 07:31 PM
My wife is in a similar situation. I-94 validity matches passport expiry (Dec 2008) , but H1 visa stamp is until Mar 2010. She has a new passport, but we are not sure if she will be out of status if she does not get a new I-94 and stays in the country beyond Dec 2008.
more...
makeup Women Inner Arm Tattoos
njdude26
04-08 05:08 PM
Then what do you do if you dont have a candian permit ??
Valid I 94 is good enough at port of entry (even if your visa in your pp is expired)... as long as
1. your stay in canada is not more than 30 days
2. you did not appear for the visa interview (@US consulate) in canada.
3. You are not from a terrorist sponsored contries such as Iran, N. Korea etc.
This is called as "Automatica visa Revalidation" rule.
In other words if your visa is rejected @ the consulate and if your visa in passport is expired, you CANNOT come back to USA (using 30 day "automatica visa revalidation" rule).
--HumHongeKamiyab
Valid I 94 is good enough at port of entry (even if your visa in your pp is expired)... as long as
1. your stay in canada is not more than 30 days
2. you did not appear for the visa interview (@US consulate) in canada.
3. You are not from a terrorist sponsored contries such as Iran, N. Korea etc.
This is called as "Automatica visa Revalidation" rule.
In other words if your visa is rejected @ the consulate and if your visa in passport is expired, you CANNOT come back to USA (using 30 day "automatica visa revalidation" rule).
--HumHongeKamiyab
girlfriend The first is the tattoo arm
jlt007us
10-06 06:09 PM
Don't worry. You will mostly get RFE but not a rejection.
My original 140 got denied as per USCIS web site but lawyer didn't get the denial notice even after 60 days. Lawyer followed it up but no response from the USCIS.
I filed 485/AP/EAD and got approvals for EAD. Lawyer refiled 140 without original labor and is almost certain that they will raise an RFE but not denial.
My original 140 got denied as per USCIS web site but lawyer didn't get the denial notice even after 60 days. Lawyer followed it up but no response from the USCIS.
I filed 485/AP/EAD and got approvals for EAD. Lawyer refiled 140 without original labor and is almost certain that they will raise an RFE but not denial.
hairstyles girls with arm tattoos.
Kitiara
10-17 05:10 AM
I've got one of Sephiroth and Vincent too somewhere... I'll dig it out. :)
eb3_nepa
04-29 08:35 PM
Where did you get this info? Could you please point out a reference that says so?
Good point, is that really against the law?
Good point, is that really against the law?
mk26
05-14 12:53 PM
MD counties charge county income tax which is a rip off. Look in VA
Agree with this statement, county tax sucks in MD
Agree with this statement, county tax sucks in MD
No comments:
Post a Comment